|
Drag-Gun |
|
The Thermal Dynamics Drag-Gun plasma cutting system has built in air compressor bringing complete portability to all sheet metal applications. Delivering a 1/8 inch (3mm) cutting capacity on carbon steel when operated on a 120 volt/20 amp curcuit.available in either 120 or 220 volt configurations providing a full 12 amps of cutting power. Weight - 25kg Input Voltage - 120v / 220v
|
|
Drag-Gun 38 |
The Thermal Dynamics Drag-Gun 38 plasma cutting system has built in air compressor delivering a 3/8 inch (9.5mm) cutting capacity. The system can operate on 208-230 volts, 1ph input power and provides 12-29 amps of cutting current. The PIP (Parts-In-Place) system prevents the system from operating without the shield cup installed. Weight - 41kg Input Voltage - 208-230v
|
|
|
Stak Pak |
|
The Thermal Arc Stak Pak is designed for cutting larger materials, and will cut up to 50mm. This item requires clean dry air, and a 3 phase 63 amp supply to run. It will also run on mixed gases for cleaner cuts on stainless steel. Weight - 80kg Input Voltage - 415v
|
|
Pak Master |
The Thermal Arc Pak 100XL is available in 415v, with an auto pilot restart. This machine is suitable for cutting 0-25mm thick material, and requires clean dry air. Weight - 44kg Input Voltage - 415v
|
|
|
Pak Master 150XL |
|
The Thermal Arc Stak Pak is designed for cutting most metals up to 1½ inch (38mm) using air / nitrigen or argon / hydrogen. Weight - 126kg Input Voltage - 208-220v / 220-380
|
|
|